Script para optimizar los valores : sysctl-config.sh

Ejecuta “sh sysctl-config.sh” o si tu servidor tiene discos ssd y bastante memoria Ram ejecuta  “sh sysctl-config.sh ssd“.

#!/bin/bash
#vim: set expandtab tabstop=4 shiftwidth=4 softtabstop=4:
#
# Author : Nicolas Brousse <nicolas@brousse.info>
#
# Notes :
#   This script is a simple "helper" to configure your sysctl.conf on linux
#   There is no silver bullet. Don't expect the perfect setup, review comments
#   and adapt the parameters to your needs and application usage.
#
#   Use this script at your OWN risk. There is no guarantee whatsoever.
#
# License :
#   This work is licenced under the CC-GNU LGPL version 2.1 or later.
#   To view a copy of this licence, visit http://creativecommons.org/licenses/LGPL/2.1/
#   or send a letter to :
#
#           Creative Commons
#           171 Second Street, Suite 300
#           San Francisco, California 94105, USA
#

host=$(hostname)

ARCH=$(uname -m)

which bc
if [ $? -ne 0 ]; then
    echo "This script require GNU bc, cf. http://www.gnu.org/software/bc/"
    echo "On Linux Debian/Ubuntu you can install it by doing : apt-get install bc"
fi

echo "Update sysctl for $host"

mem_bytes=$(awk '/MemTotal:/ { printf "%0.f",$2 * 1024}' /proc/meminfo)
shmmax=$(echo "$mem_bytes * 0.90" | bc | cut -f 1 -d '.') 
shmall=$(expr $mem_bytes / $(getconf PAGE_SIZE))
max_orphan=$(echo "$mem_bytes * 0.10 / 65536" | bc | cut -f 1 -d '.')
file_max=$(echo "$mem_bytes / 4194304 * 256" | bc | cut -f 1 -d '.')
max_tw=$(($file_max*2))
min_free=$(echo "($mem_bytes / 1024) * 0.01" | bc | cut -f 1 -d '.')

if [ "$1" != "ssd" ]; then
    vm_dirty_bg_ratio=5
    vm_dirty_ratio=15
else
    # This setup is generally ok for ssd and highmem servers
    vm_dirty_bg_ratio=3
    vm_dirty_ratio=5
fi
 
>/etc/sysctl.conf cat << EOF 

# Disable syncookies (syncookies are not RFC compliant and can use too muche resources)
net.ipv4.tcp_syncookies = 0

# Basic TCP tuning
net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_synack_retries = 3
net.ipv4.tcp_syn_retries = 3

# RFC1337
net.ipv4.tcp_rfc1337 = 1

# Defines the local port range that is used by TCP and UDP
# to choose the local port
net.ipv4.ip_local_port_range = 1024 65535

# Log packets with impossible addresses to kernel log
net.ipv4.conf.all.log_martians = 1

# Minimum interval between garbage collection passes This interval is
# in effect under high memory pressure on the pool
net.ipv4.inet_peer_gc_mintime = 5

# Disable Explicit Congestion Notification in TCP
net.ipv4.tcp_ecn = 0

# Enable window scaling as defined in RFC1323
net.ipv4.tcp_window_scaling = 1

# Enable timestamps (RFC1323)
net.ipv4.tcp_timestamps = 1

# Enable select acknowledgments
net.ipv4.tcp_sack = 1

# Enable FACK congestion avoidance and fast restransmission
net.ipv4.tcp_fack = 1

# Allows TCP to send "duplicate" SACKs
net.ipv4.tcp_dsack = 1

# Controls IP packet forwarding
net.ipv4.ip_forward = 0

# No controls source route verification (RFC1812)
net.ipv4.conf.default.rp_filter = 0

# Enable fast recycling TIME-WAIT sockets
net.ipv4.tcp_tw_recycle = 1

# TODO : change TCP_SYNQ_HSIZE in include/net/tcp.h
# to keep TCP_SYNQ_HSIZE*16<=tcp_max_syn_backlog
net.ipv4.tcp_max_syn_backlog = 20000

# tells the kernel how many TCP sockets that are not attached
# to any user file handle to maintain
net.ipv4.tcp_max_orphans = $max_orphan

# How may times to retry before killing TCP connection, closed by our side
net.ipv4.tcp_orphan_retries = 1

# how long to keep sockets in the state FIN-WAIT-2
# if we were the one closing the socket
net.ipv4.tcp_fin_timeout = 20

# maximum number of sockets in TIME-WAIT to be held simultaneously
net.ipv4.tcp_max_tw_buckets = $max_tw

# don't cache ssthresh from previous connection
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1

# increase Linux autotuning TCP buffer limits
net.ipv4.tcp_rmem = 4096 87380 16777216 
net.ipv4.tcp_wmem = 4096 65536 16777216

# increase TCP max buffer size
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216

net.core.netdev_max_backlog = 2500
net.core.somaxconn = 65000

vm.swappiness = 0

# You can monitor the kernel behavior with regard to the dirty
# pages by using grep -A 1 dirty /proc/vmstat
vm.dirty_background_ratio = $vm_dirty_bg_ratio
vm.dirty_ratio = $vm_dirty_ratio

# required free memory (set to 1% of physical ram)
vm.min_free_kbytes = $min_free

# system open file limit
fs.file-max = $file_max

# Core dump suidsafe
fs.suid_dumpable = 2 

kernel.printk = 4 4 1 7
kernel.core_uses_pid = 1
kernel.sysrq = 0
kernel.msgmax = 65536
kernel.msgmnb = 65536

# Maximum shared segment size in bytes
kernel.shmmax = $shmmax

# Maximum number of shared memory segments in pages
kernel.shmall = $shmall
EOF

/sbin/sysctl -p /etc/sysctl.conf
exit $?

# Kernel sysctl configuration file for Linux
#
# Version 1.9 - 2011-03-23
# Michiel Klaver - IT Professional
# http://klaver.it/linux/ for the latest version - http://klaver.it/bsd/ for a BSD variant
#
# This file should be saved as /etc/sysctl.conf and can be activated using the command:
# sysctl -e -p /etc/sysctl.conf
#
# For binary values, 0 is disabled, 1 is enabled.  See sysctl(8) and sysctl.conf(5) for more details.
#
# Tested with: Debian 4 etchnhalf kernel version 2.6.24 default stock out-of-the-box
#              Debian 5 kernel version 2.6.26 default stock out-of-the-box
#              CentOS 5.4 kernel 2.6.18 default stock out-of-the-box

#
# Intended use for dedicated server systems at high-speed networks with loads of RAM and bandwidth available
# Optimised and tuned for high-performance web/ftp/mail/dns servers with high connection-rates
# DO NOT USE at busy networks or xDSL/Cable connections where packetloss can be expected
# ----------

# Credits:
# http://www.enigma.id.au/linux_tuning.txt
# http://www.securityfocus.com/infocus/1729
# http://fasterdata.es.net/TCP-tuning/linux.html
# http://fedorahosted.org/ktune/browser/sysctl.ktune
# http://www.cymru.com/Documents/ip-stack-tuning.html
# http://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
# http://www.frozentux.net/ipsysctl-tutorial/chunkyhtml/index.html
# http://knol.google.com/k/linux-performance-tuning-and-measurement
# http://www.cyberciti.biz/faq/linux-kernel-tuning-virtual-memory-subsystem/
# http://www.redbooks.ibm.com/abstracts/REDP4285.html
# http://www.speedguide.net/read_articles.php?id=121
# http://lartc.org/howto/lartc.kernel.obscure.html
# http://en.wikipedia.org/wiki/Sysctl



###
### GENERAL SYSTEM SECURITY OPTIONS ###
###

# Auto-reboot linux 30 seconds after a kernel panic
kernel.panic = 30
kernel.panic_on_oops = 30

# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0

# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1

#Allow for more PIDs
kernel.pid_max = 65536

# The contents of /proc/<pid>/maps and smaps files are only visible to
# readers that are allowed to ptrace() the process
kernel.maps_protect = 1

#Enable ExecShield protection
kernel.exec-shield = 1
kernel.randomize_va_space = 1

# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536

# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536



###
### IMPROVE SYSTEM MEMORY MANAGEMENT ###
###

# Increase size of file handles and inode cache
fs.file-max = 209708

# Do less swapping
vm.swappiness = 10
vm.dirty_ratio = 60
vm.dirty_background_ratio = 2

# specifies the minimum virtual address that a process is allowed to mmap
vm.mmap_min_addr = 4096

# No overcommitment of available memory
vm.overcommit_ratio = 0
vm.overcommit_memory = 0

# Set maximum amount of memory allocated to shm to 256MB
kernel.shmmax = 268435456
kernel.shmall = 268435456

# Keep at least 64MB of free RAM space available
vm.min_free_kbytes = 65536



###
### GENERAL NETWORK SECURITY OPTIONS ###
###

#Prevent SYN attack, enable SYNcookies (they will kick-in when the max_syn_backlog reached)
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_syn_retries = 5
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_max_syn_backlog = 4096

# Disables packet forwarding
net.ipv4.ip_forward = 0
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.default.forwarding = 0

# Disables IP source routing
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv6.conf.all.accept_source_route = 0
net.ipv6.conf.default.accept_source_route = 0

# Enable IP spoofing protection, turn on source route verification
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1

# Disable ICMP Redirect Acceptance
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv6.conf.all.accept_redirects = 0
net.ipv6.conf.default.accept_redirects = 0

# Disable Log Spoofed Packets, Source Routed Packets, Redirect Packets
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.default.log_martians = 0

# Decrease the time default value for tcp_fin_timeout connection
net.ipv4.tcp_fin_timeout = 15

# Decrease the time default value for connections to keep alive
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_keepalive_probes = 5
net.ipv4.tcp_keepalive_intvl = 15

# Don't relay bootp
net.ipv4.conf.all.bootp_relay = 0

# Don't proxy arp for anyone
net.ipv4.conf.all.proxy_arp = 0

# Turn on SACK
net.ipv4.tcp_dsack = 1
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 1

# Turn on the tcp_timestamps
net.ipv4.tcp_timestamps = 1

# Don't ignore directed pings
net.ipv4.icmp_echo_ignore_all = 0

# Enable ignoring broadcasts request
net.ipv4.icmp_echo_ignore_broadcasts = 1

# Enable bad error message Protection
net.ipv4.icmp_ignore_bogus_error_responses = 1

# Allowed local port range
net.ipv4.ip_local_port_range = 16384 65536

# Enable a fix for RFC1337 - time-wait assassination hazards in TCP
net.ipv4.tcp_rfc1337 = 1



###
### TUNING NETWORK PERFORMANCE ###
###

# Do a 'modprobe tcp_cubic' first
net.ipv4.tcp_congestion_control = cubic

# Turn on the tcp_window_scaling
net.ipv4.tcp_window_scaling = 1

# Increase the maximum total buffer-space allocatable
# This is measured in units of pages (4096 bytes)
net.ipv4.tcp_mem = 65536 131072 262144
net.ipv4.udp_mem = 65536 131072 262144

# Increase the read-buffer space allocatable
net.ipv4.tcp_rmem = 8192 87380 16777216
net.ipv4.udp_rmem_min = 16384
net.core.rmem_default = 131072
net.core.rmem_max = 16777216

# Increase the write-buffer-space allocatable
net.ipv4.tcp_wmem = 8192 65536 16777216
net.ipv4.udp_wmem_min = 16384
net.core.wmem_default = 131072
net.core.wmem_max = 16777216

# Increase number of incoming connections
net.core.somaxconn = 32768

# Increase number of incoming connections backlog
net.core.netdev_max_backlog = 4096
net.core.dev_weight = 64

# Increase the maximum amount of option memory buffers
net.core.optmem_max = 65536

# Increase the maximum number of skb-heads to be cached
#net.core.hot_list_length = 1024

# Increase the tcp-time-wait buckets pool size to prevent simple DOS attacks
net.ipv4.tcp_max_tw_buckets = 1440000
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1

# Limit number of orphans, each orphan can eat up to 16M (max wmem) of unswappable memory
net.ipv4.tcp_max_orphans = 16384
net.ipv4.tcp_orphan_retries = 0

# Increase the maximum memory used to reassemble IP fragments
net.ipv4.ipfrag_high_thresh = 512000
net.ipv4.ipfrag_low_thresh = 446464

# don't cache ssthresh from previous connection
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1

# Increase RPC slots
sunrpc.tcp_slot_table_entries = 32
sunrpc.udp_slot_table_entries = 32

# Increase size of RPC datagram queue length
net.unix.max_dgram_qlen = 50

# Don't allow the arp table to become bigger than this
net.ipv4.neigh.default.gc_thresh3 = 2048

# Tell the gc when to become aggressive with arp table cleaning.
# Adjust this based on size of the LAN. 1024 is suitable for most /24 networks
net.ipv4.neigh.default.gc_thresh2 = 1024

# Adjust where the gc will leave arp table alone - set to 32.
net.ipv4.neigh.default.gc_thresh1 = 32

# Adjust to arp table gc to clean-up more often
net.ipv4.neigh.default.gc_interval = 30

# Increase TCP queue length
net.ipv4.neigh.default.proxy_qlen = 96
net.ipv4.neigh.default.unres_qlen = 6

# Enable Explicit Congestion Notification (RFC 3168), disable it if it doesn't work for you
net.ipv4.tcp_ecn = 1
net.ipv4.tcp_ecn = 2
net.ipv4.tcp_reordering = 3

# How many times to retry killing an alive TCP connection
net.ipv4.tcp_retries2 = 15
net.ipv4.tcp_retries1 = 3

# This will enusre that immediatly subsequent connections use the new values
net.ipv4.route.flush = 1
net.ipv6.route.flush = 1



###
### Comments/suggestions/additions are welcome!
###

Opciones de seguridad en Linux a través de /proc (I) y (II)

Script para optimizar los valores HugePages (TLB) Large Page Support

#!/bin/bash
#
# hugepages_settings.sh
#
# Linux bash script to compute values for the
# recommended HugePages/HugeTLB configuration
#
# Note: This script does calculation for all shared memory
# segments available when the script is run, no matter it
# is an Oracle RDBMS shared memory segment or not.
# Check for the kernel version
KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`
# Find out the HugePage size
HPG_SZ=`grep Hugepagesize /proc/meminfo | awk {'print $2'}`
# Start from 1 pages to be on the safe side and guarantee 1 free HugePage
NUM_PG=1
# Cumulative number of pages required to handle the running shared memory segments
for SEG_BYTES in `ipcs -m | awk {'print $5'} | grep "[0-9][0-9]*"`
do
   MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`
   if [ $MIN_PG -gt 0 ]; then
      NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`
   fi
done
# Finish with results
case $KERN in
   '2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;
          echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;
   '2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
    *) echo "Unrecognized kernel version $KERN. Exiting." ;;
esac
# End